GUIDE LINES

For best performance of powder coatings

  • 1

    Article to be coated must be free from dust and grease and throughly be cleaned, Iron or zinc phosphating strongly recommended for better corrosion resistance.

  • 2

    Powders are applied by corona charging equipments. Voltage may vary between 30-10 KV depending on product.

  • 3

    Film thickness should be maintained as per manufacturer recommendation. Structural finishes should be applied at 80-100 mic and plain solid shades at 50-60 mic.

  • 4

    Follow curing cycle as recommended by the manufacturer.

  • 5

    Powders should be stored in dry and cool area below 25°C. Validity of the powder is six months from the date of manufacturing.

  • 6

    Do not mix our products with that of other manufacturers.